跳到正文
原文
Nature 健康护理主题·· 15 天前AI 评分15

不同牙槽骨丧失条件下固定保持器设计的生物力学效应:有限元分析

Biomechanical effects of fixed retainer designs under different labiolingual alveolar bone loss conditions: a finite element analysis

AI 导读

本研究通过有限元分析评估了在不同牙槽骨丧失条件下,三种不同固定保持器设计的生物力学效应。随着牙槽骨支持减少,牙齿位移和应力集中增加,其中以牙唇侧三分之二-舌侧三分之一牙槽骨丧失模型最为显著。研究指出,在牙周支持减少的患者中,固定保持器的选择不应仅基于材料或设计,还应考虑牙槽骨丧失的程度和分布。

正文

We’re sharing this article early to provide faster access to peer-reviewed, accepted research. It is citable and carries a permanent DOI. This version is subject to further edits and will be replaced automatically by the final Version of Record. All legal disclaimers apply.

Abstract

This study aimed to evaluate the biomechanical effects of three different fixed retainer designs in the mandibular anterior region under different labiolingual alveolar bone loss conditions using finite element analysis. Three alveolar bone models were created for the mandibular anterior region: intact alveolar bone, labial one-third–lingual two-thirds alveolar bone loss, and labial two-thirds–lingual one-third alveolar bone loss. Three different retainer designs were applied to each bone model: a multistranded stainless steel retainer, a rectangular dead-soft stainless steel retainer, and a CAD/CAM NiTi retainer, resulting in a total of nine finite element models. To simulate incisal edge loading, a total vertical force of 285.3 N was applied to the mandibular anterior teeth. Tooth displacement, maximum and minimum principal stresses in the periodontal ligament, von Mises stress in the retainer wires, and maximum principal stress distribution in the adhesive composite were evaluated. As alveolar bone support decreased, tooth displacement and stress concentrations in the periodontal ligament, retainer wire, and adhesive composite increased. The most pronounced biomechanical changes were observed in the labial two-thirds–lingual one-third alveolar bone loss models. Labiolingual displacement was the dominant movement component. Although differences were observed among the retainer designs, alveolar bone morphology had a more pronounced effect than retainer type. In patients with reduced periodontal support, fixed retainer selection should not be based solely on material or design. The degree and labiolingual distribution of alveolar bone loss should also be considered during retention planning.

Abbreviations

CAD/CAM:

Computer-aided design/computer-aided manufacturing

CBCT:

Cone-beam computed tomography

CT:

Computed tomography

DICOM:

Digital imaging and communications in medicine

ECC RAM:

Error-correcting code random-access memory

FDI:

Fédération Dentaire Internationale

GB:

Gigabyte

GHz:

Gigahertz

HU:

Hounsfield unit

MPa:

Megapascal

NiTi:

Nickel–titanium

PDL:

Periodontal ligament

STL:

Standard tessellation language

Acknowledgements

The authors thank Tinus Technologies for their technical support during finite element model construction and analysis.

Funding

This study was supported by the Scientific Research Projects Coordination Unit of Karadeniz Technical University under project number 17081.

Author information

Authors and Affiliations

  1. Department of Orthodontics, Faculty of Dentistry, Karadeniz Technical University, Ortahisar, Trabzon, 61080, Turkey

    E. Tuhan Kutlu & T. Carkaci

Authors

  1. E. Tuhan Kutlu
  2. T. Carkaci

Corresponding author

Correspondence to E. Tuhan Kutlu.

Ethics declarations

Competing interests

The authors declare no competing interests.

Ethics approval and consent to participate

Not applicable. This study was conducted as a finite element analysis and did not involve human participants, animals, or identifiable patient data.

Informed consent

Not applicable. This study did not involve human participants or identifiable patient data.

Consent for publication

Not applicable.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tuhan Kutlu, E., Carkaci, T. Biomechanical effects of fixed retainer designs under different labiolingual alveolar bone loss conditions: a finite element analysis. Sci Rep (2026). https://doi.org/10.1038/s41598-026-78921-4

Download citation

  • Received: 07 August 2026

  • Accepted: 28 October 2026

  • Published: 05 November 2026

  • DOI: https://doi.org/10.1038/s41598-026-78921-4

Keywords

来源:Nature 健康护理主题 · nature.com