跳到正文
原文
Nature 健康护理主题·· 10 天前AI 评分35

面部口罩性能评估:从纺织过滤效率测定到最小化空气泄漏

Performance evaluation of face mask: from textile filtration determination to air leakage minimization

AI 导读

该研究评估并比较了不同面部口罩的过滤效率和压力差,开发了一种独立量化鼻腔和口腔空气泄漏的测试平台,旨在优化口罩设计,提高呼吸道疾病防护措施的效果。结果显示,N95 口罩在特定流量下表现出优越的过滤效率和可接受的压力差。

正文

Scientific Reports (2026) Cite this article

We’re sharing this article early to provide faster access to peer-reviewed, accepted research. It is citable and carries a permanent DOI. This version is subject to further edits and will be replaced automatically by the final Version of Record. All legal disclaimers apply.

Abstract

The SARS-CoV-2 pandemic emphasized the critical role of face masks in preventing the transmission of respiratory viruses, especially in medical settings. Respiratory viruses, including SARS, influenza, and adenoviruses are primarily transmitted through the respiratory pathways, making face masks the primary barrier for protection. This study aims to evaluate and compare the filtration efficiency and pressure differentials of different face masks to contribute to the development of a comprehensive test bench for medical textiles. Unlike prior fit-testing approaches that assess mask fit only as a wearing condition, this study introduces a test bench that independently quantifies nasal and oral air leakage under controlled sealing configurations, providing a reproducible platform for evaluating custom sealing accessories. The design of a sealing device is also evaluated to assess the effectiveness of a physical external sealer. The study focuses on designing and evaluating accessory seals for face masks to determine air loss percentages in areas where the mask is not in complete contact with the face. The creation of a test bench for textiles in medical use is intended to contribute valuable insights into mask performance, addressing both filtration efficiency and pressure differentials. The study evaluates different face masks including N95, surgical, and newly developed fabrics. Results revealed that N95 masks consistently demonstrate superior filtration efficiency and acceptable pressure differentials across specific flow rates. Thus, understanding face mask efficacies is crucial for optimizing mask designs, contributing to the advancement of protective measures against respiratory diseases.

Acknowledgements

The authors extend their gratitude to the Civil and Environmental Engineering Department at Universidad de los Andes (Bogotá, Colombia) for providing the necessary tools to develop the textile filtration efficiency tests and to Fundación Cardioinfantil – Fundación Neumológica Colombiana for allowing the use of respiratory equipment for testing the seals, designed and 3d-printed at Pontificia Universidad Javeriana (Bogotá, Colombia). We also express our gratitude to Protela for the provision of fabric face masks.

Funding

This study “Prototipado rápido, pruebas, y escalado de soluciones basadas en manufactura aditiva para insumos COVID-19 y post-COVID-19” received funding from Universidad de los Andes, Universidad del Rosario and Pontificia Universidad Javeriana. The project components involving 3D modeling and printing were completed at the Center for Modeling and 3D Printing at Fundación Cardioinfantil – Instituto de Cardiología (Bogotá, Colombia), under funding the Colombian Ministry of Science (Ministerio de Ciencia, Tecnología e Investigación—MinCiencias) under contract 744-2021 (Project code #223989785090).

Author information

Authors and Affiliations

  1. Department of Biomedical Engineering, Universidad de los Andes, Bogotá, Colombia

    Ian C. Orjuela-Garzón, Inés María Fernández-Calderón, Camilo Eduardo Pérez-Cualtán, Camila Irene Castro-Paez & Juan Carlos Briceño

  2. Faculty of Engineering, Pontificia Universidad Javeriana, Bogotá, Colombia

    Laura M. González-Carvajal & Daniel Suárez

  3. Center for Modeling and 3D Printing, Fundación Cardioinfantil – Instituto de Cardiología, Bogotá, Colombia

    Inés María Fernández-Calderón, Camilo Eduardo Pérez-Cualtán, Javier Navarro & Juan Carlos Briceño

  4. Department of Civil and Environmental Engineering, Universidad de Los Andes, Bogotá, Colombia

    Diego Roberto Rojas-Neisa, Ángela Viviana Moreno & Ricardo Morales-Betancourt

  5. Department of Industrial Engineering, Pontificia Universidad Javeriana, Bogotá, Colombia

    Daniel Suárez

  6. Visible Heart Laboratories, Department of Surgery, Institute for Engineering in Medicine, University of Minnesota, Minneapolis, MN, USA

    Javier Navarro

  7. Department of Research, Fundación Cardioinfantil – Instituto de Cardiología, Bogotá, Colombia

    Juan Carlos Briceño

  8. Medical Intensive Care Unit, Lung Transplant Program, Fundación Cardioinfantil – Instituto de Cardiología, Bogotá, Colombia

    Fabio Varon-Vega

Authors

  1. Ian C. Orjuela-Garzón
  2. Inés María Fernández-Calderón
  3. Laura M. González-Carvajal
  4. Camilo Eduardo Pérez-Cualtán
  5. Diego Roberto Rojas-Neisa
  6. Ángela Viviana Moreno
  7. Camila Irene Castro-Paez
  8. Daniel Suárez
  9. Ricardo Morales-Betancourt
  10. Fabio Varon-Vega
  11. Javier Navarro
  12. Juan Carlos Briceño

Corresponding author

Correspondence to Juan Carlos Briceño.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Orjuela-Garzón, I.C., Fernández-Calderón, I.M., González-Carvajal, L.M. et al. Performance evaluation of face mask: from textile filtration determination to air leakage minimization. Sci Rep (2026). https://doi.org/10.1038/s41598-026-76852-8

Download citation

  • Received: 06 April 2026

  • Accepted: 15 October 2026

  • Published: 10 November 2026

  • DOI: https://doi.org/10.1038/s41598-026-76852-8

Keywords

来源:Nature 健康护理主题 · nature.com