跳到正文
原文
Nature 健康护理主题·· 2026-10-14AI 评分40

咖啡热循环对永久冠材料表面粗糙度、微硬度及颜色稳定性的影响

Effects of coffee thermocycling on surface roughness, microhardness, and color stability of permanent crown materials

AI 导读

一项体外研究表明,10,000次咖啡热循环后,CeraSmart 270 显示出最低的 Ra(0.159 μm)和最高的维氏硬度(93.87 HV),而 Permanent Crown Resin 的色差 ΔE*ab 最大(4.19)。所有测试材料表面粗糙度均显著增加,CeraSmart 270 的稳定性优于受试的 3D 打印树脂。

正文

Scientific Reports (2026) Cite this article

We’re sharing this article early to provide faster access to peer-reviewed, accepted research. It is citable and carries a permanent DOI. This version is subject to further edits and will be replaced automatically by the final Version of Record. All legal disclaimers apply.

Abstract

Permanent crown resins manufactured by additive technologies are increasingly used for definitive restorations, yet their resistance to combined thermal and chemical aging remains incompletely characterized. This in vitro study compared four 3D-printed permanent crown resins (VarseoSmile TriniQ, NextDent C&B MFH, CROWNTEC, and Permanent Crown Resin) with a milled composite-based CAD/CAM material (CeraSmart 270). Disk-shaped specimens (n = 10/group) were evaluated for surface roughness, surface morphology, microhardness, and color before and after 10,000 coffee thermocycles between 5 °C and 55 °C. Surface roughness increased significantly in all materials. After aging, CeraSmart 270 showed the lowest Ra (0.159 ± 0.005 μm) and highest Vickers hardness (93.87 ± 4.80 HV), whereas Permanent Crown Resin showed the highest Ra (0.322 ± 0.014 μm), lowest hardness (20.22 ± 1.40 HV), and greatest color change (ΔE*ab = 4.19 ± 0.30). Permanent Crown Resin and NextDent C&B MFH exceeded the predefined ΔE*ab reference value of 3.3. Coffee thermocycling produced material-dependent effects, with CeraSmart 270 showing greater overall stability than the tested 3D-printed resins under the conditions of this study.

Funding

This study was supported by the Scientific Research Projects Coordination Unit of Fırat University (FUBAP) under Grant No. DHF.24.06.

Author information

Authors and Affiliations

  1. Department of Prosthodontics, Faculty of Dentistry, Fırat University, Elazığ, Türkiye, Turkey

    Nurgül Ersoy & Samet Tekin

  2. Department of Dental Services, Vocational School of Health Services, Ondokuz Mayıs University, Samsun, Türkiye, Turkey

    Semih Ercan Akgün

Authors

  1. Nurgül Ersoy
  2. Semih Ercan Akgün
  3. Samet Tekin

Corresponding author

Correspondence to Semih Ercan Akgün.

Ethics declarations

Competing interests

The authors declare no competing interests.

Ethical approval

Ethical approval for this study was obtained from the Fırat University Non-Interventional Research Ethics Committee (approval date: September 11, 2024; decision no. 2024/12-33).

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ersoy, N., Akgün, S.E. & Tekin, S. Effects of coffee thermocycling on surface roughness, microhardness, and color stability of permanent crown materials. Sci Rep (2026). https://doi.org/10.1038/s41598-026-76123-6

Download citation

  • Received: 29 August 2026

  • Accepted: 12 October 2026

  • Published: 14 October 2026

  • DOI: https://doi.org/10.1038/s41598-026-76123-6

Keywords

来源:Nature 健康护理主题 · nature.com