传统印模与数字化印模在上颌全口义齿制作中的准确性及临床性能对比:一项随机对照试验
Accuracy and clinical performance of conventional versus digital impressions for maxillary complete dentures: a randomized controlled clinical trial
20名无牙颌患者参与的随机交叉试验显示,数字化印模全表面均方根偏差为234.63 μm,低于300 μm阈值。尽管数字化印模在腭穹隆和牙槽嵴顶区域准确性更高,传统印模在腭后固位及侧向、前后向稳定性与支持方面显著优于数字化印模。
- Article
- Open access
- Published: 13 October 2026
Scientific Reports (2026) Cite this article
We’re sharing this article early to provide faster access to peer-reviewed, accepted research. It is citable and carries a permanent DOI. This version is subject to further edits and will be replaced automatically by the final Version of Record. All legal disclaimers apply.
Abstract
This study aimed to compare the three-dimensional trueness of digital impressions with conventional impressions for maxillary complete dentures and to evaluate the clinical performance of denture bases fabricated from each technique. Twenty completely edentulous participants received both conventional impressions and digital impressions using an intraoral scanner in a randomized crossover design. Conventional impressions were digitized and used as reference models. Trueness was assessed by root mean square (RMS) deviations for the entire surface and predefined anatomical regions. Denture bases were fabricated using stereolithographic 3D printing. Retention, stability, and support were clinically evaluated by blinded examiners. Statistical analyses included parametric and nonparametric tests (α = 0.05) with effect size estimation. Mean RMS deviation for the entire digital impression was 234.63 ± 43.87 μm and was significantly below the 300-µm reference threshold (Cohen’s d = − 1.49, representing the standardized difference from this threshold). The palatal vault (d = − 3.03) and ridge crest (d = − 2.88) showed the largest standardized differences below the 300-µm threshold, whereas the peripheral border (d = 1.47) and posterior palatal seal (d = 0.85) showed standardized differences above the threshold (P ≤ 0.001). Conventional denture bases showed significantly higher posterior retention, lateral and anteroposterior stability, and anteroposterior support (r = 0.60–0.77; P ≤ 0.007). No significant differences were observed for anterior retention or lateral support. Digital impressions demonstrated region-dependent trueness relative to conventional reference impressions, with lower deviations in the palatal vault and ridge crest regions and greater deviations in peripheral and posterior sealing regions. However, conventional impressions provided superior clinical performance for several retention, stability, and support parameters.
Abbreviations
- 3D:
-
Three-dimensional
- CAD/CAM:
-
Computer-aided design/computer-aided manufacturing
- CBCT:
-
Cone-beam computed tomography
- CI:
-
Confidence interval
- CONSORT:
-
Consolidated standards of reporting trials
- CRM:
-
Conventional reference model
- ES:
-
Entire surface
- ES-PB:
-
Entire surface excluding peripheral borders
- ID:
-
Identification number
- IOS:
-
Intraoral scanner
- ISRCTN:
-
International standard randomised controlled trial number
- OBJ:
-
Object file format
- P:
-
Palate
- PB:
-
Peripheral border
- PIP:
-
Pressure indicating paste
- PLY:
-
Polygon file format
- PPS:
-
Posterior palatal seal
- R:
-
Ridge crest
- RMS:
-
Root mean square
- SD:
-
Standard deviation
- SLA:
-
Stereolithography
- SPSS:
-
Statistical package for the social sciences
- STL:
-
Standard tessellation language
- T:
-
Test model
- ZOE:
-
Zinc oxide–eugenol
Author information
Authors and Affiliations
Department of Removable Prosthodontics, Faculty of Dental Medicine, University of Damascus, Damascus, Syria
Mohammad Murhaf Habash & Ammar Almustafa
Department of Pediatric Dentistry, Faculty of Dental Medicine, University of Damascus, Damascus, Syria
Hasan Alzoubi
Authors
- Mohammad Murhaf Habash
- Ammar Almustafa
- Hasan Alzoubi
Corresponding author
Correspondence to Hasan Alzoubi.
Ethics declarations
Competing interests
The authors declare no competing interests.
Ethical approval
Ethical approval was obtained from the Institutional Review Board of the Faculty of Dentistry, Damascus University (UDDS-3429-29052023/SRC-1550), and the trial was registered with ISRCTN ID: ISRCTN66836054; https://www.isrctn.com/ISRCTN66836054). The study protocol conformed to the principles of the Declaration of Helsinki.
Informed consent
Written informed consent was obtained from all participants prior to enrollment.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.
About this article
Cite this article
Habash, M.M., Almustafa, A. & Alzoubi, H. Accuracy and clinical performance of conventional versus digital impressions for maxillary complete dentures: a randomized controlled clinical trial. Sci Rep (2026). https://doi.org/10.1038/s41598-026-75157-0
Received: 24 June 2026
Accepted: 05 October 2026
Published: 13 October 2026
DOI: https://doi.org/10.1038/s41598-026-75157-0
Keywords
来源:Nature 健康护理主题 · nature.com