跳到正文
原文
Nature 健康护理主题·· 15 小时前AI 评分30

不同面部类型下颌骨尺寸对微型螺钉植入的影响评估

Mandibular bone dimensions for miniscrew placement in different facial biotypes assessed by cone-beam computed tomography

AI 导读

该横断面研究通过锥形束计算机断层扫描评估了150名15-35岁患者的面部类型、牙间部位和测量深度对下颌骨颊侧皮质厚度、颊舌向牙槽骨厚度和牙间距离的影响。结果显示,深度不同会导致颊侧皮质厚度和颊舌向牙槽骨厚度显著变化,而牙间距离的变化不显著。这些发现支持个体化的微型螺钉植入位置评估,但未评价临床稳定性和成功率。

正文

Scientific Reports (2026) Cite this article

We’re sharing this article early to provide faster access to peer-reviewed, accepted research. It is citable and carries a permanent DOI. This version is subject to further edits and will be replaced automatically by the final Version of Record. All legal disclaimers apply.

Abstract

To assess mandibular buccal cortical thickness, buccolingual alveolar thickness, and interradicular distance across facial biotypes, interradicular sites, and measurement depths using cone-beam computed tomography (CBCT). This cross-sectional study included 150 patients aged 15–35 years classified by the Ricketts VERT index as mesofacial (n = 50), dolichofacial (n = 40), severe dolichofacial (n = 11), brachyfacial (n = 24), or severe brachyfacial (n = 25). Bilaterally averaged measurements were obtained at four mandibular interradicular sites and at 4, 6, and 8 mm apical to the alveolar crest (1,800 observations per outcome). Three linear mixed-effects models included patient-level random intercepts and fixed effects for biotype, depth, site, age, and biotype-by-depth interaction. Significant facial biotype-by-depth interactions were observed for buccal cortical thickness (Wald χ²(8) = 26.22; p = 0.001) and buccolingual alveolar thickness (χ²(8) = 36.72; p < 0.001), but not for interradicular distance (χ²(8) = 9.44; p = 0.307). Compared with 4 mm, measurements at 8 mm showed significantly greater interradicular distance (β = 0.449 mm; p < 0.001), buccal cortical thickness (β = 0.136 mm; p = 0.001), and buccolingual alveolar thickness (β = 0.704 mm; p = 0.001). Compared with the canine–first premolar region, the first–second molar region exhibited greater interradicular distance (β = 2.157 mm), buccal cortical thickness (β = 1.435 mm), and buccolingual alveolar thickness (β = 3.413 mm; all p < 0.001). Mandibular bone dimensions vary by anatomical site and depth, with depth-related differences across facial biotypes for cortical and buccolingual thickness. These anatomical findings support individualized miniscrew site assessment; clinical stability and success were not evaluated.

Funding

No funding was obtained for this research.

Author information

Authors and Affiliations

  1. Department of Health Sciences, University of the Hemispheres, Quito, Ecuador

    Adela Maribel Cuji Paguay, Marjory Elizabeth Vaca Zapata, Mauricio Aguirre Balseca & Nataly Arias

  2. Department of Orthodontics, Ingá University Center UNINGÁ, Rod PR 317, 6114, Maringá, 87035-510, PR, Brazil

    Karina Maria Salvatore Freitas

Authors

  1. Adela Maribel Cuji Paguay
  2. Marjory Elizabeth Vaca Zapata
  3. Mauricio Aguirre Balseca
  4. Karina Maria Salvatore Freitas
  5. Nataly Arias

Corresponding author

Correspondence to Karina Maria Salvatore Freitas.

Ethics declarations

Competing interests

The authors declare no competing interests.

Ethics approval

This study was approved by the Ethics Committee of the University of the Hemispheres, Quito, Ecuador (Approval No. CEUHE25-54). All methods were carried out in accordance with the relevant guidelines and regulations, including the Declaration of Helsinki.

Consent to participate

All patients (or their parents/legal guardians, in the case of minor participants) signed informed consent to participate in this study. For participants under the age of 18, written informed consent was obtained from their parent(s) or legal guardian(s) prior to inclusion in the study.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cuji Paguay, A.M., Vaca Zapata, M.E., Aguirre Balseca, M. et al. Mandibular bone dimensions for miniscrew placement in different facial biotypes assessed by cone-beam computed tomography. Sci Rep (2026). https://doi.org/10.1038/s41598-026-80767-9

Download citation

  • Received: 18 August 2026

  • Accepted: 11 November 2026

  • Published: 20 November 2026

  • DOI: https://doi.org/10.1038/s41598-026-80767-9

Keywords

来源:Nature 健康护理主题 · nature.com