跳到正文
原文
Nature 健康护理主题·· 2026-10-13AI 评分30

Scientific Reports:ISO 3 牙间刷纤维质量与通道孔径的实验室评估

Laboratory evaluation of fibre quality and passage hole diameter of interdental toothbrushes

AI 导读

一项实验室评估显示,8 组不同厂商的 ISO 3 牙间刷在刷毛质量和标示尺寸一致性上存在明显差异。扫描电镜和立体显微镜检查中,每组超过 86% 的刷毛按所用形态学分类被判为不可接受。厂商标示的 ISO 尺寸与实测通道孔径存在显著差异,研究团队据此呼吁加强监管与质量控制。

正文

Scientific Reports (2026) Cite this article

We’re sharing this article early to provide faster access to peer-reviewed, accepted research. It is citable and carries a permanent DOI. This version is subject to further edits and will be replaced automatically by the final Version of Record. All legal disclaimers apply.

Abstract

The market offers a wide range of interdental toothbrushes varying in design, price, and environmental characteristics; however, the relationship between these factors and product quality remains unclear. As correct sizing is essential for safe and efficient use, this study evaluated the quality of bristles (fibres) in commercially available ISO 3 interdental toothbrushes and compared manufacturer-declared ISO sizes with values obtained through laboratory measurements. Eight sets of ISO 3 labelled interdental toothbrushes from different manufacturers were examined. Bristle tip quality, bristle arrangement, wire twisting, and the diameters of wires and bristles were assessed using stereomicroscopy and scanning electron microscopy. Bristle tip morphology was evaluated according to the Silverstone and Featherstone classification modified by Reiter and Wetzel. Compliance with declared ISO sizes was verified by measuring the passage hole diameter. The results revealed considerable variability in bristle quality among the tested products. More than 86% of bristles in every group were classified as non-acceptable according to the applied morphological classification. In addition, significant discrepancies were found between the declared and measured ISO sizes. These results highlight the necessity for stricter regulatory oversight and improved quality control to ensure the reliability and safety of interdental toothbrushes.

Acknowledgements

The author would like to acknowledge the provision of laboratories and equipment through the University of Pardubice.

Funding

The publication was created with the support of a grant IGA_LF_2024_024.

Author information

Authors and Affiliations

  1. Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University, Olomouc, 779 00, Czech Republic

    K. Hynková & I. Voborná

  2. Department of Dentistry, Faculty of Medicine in Hradec Kralove, Charles University, University Hospital Hradec Kralove, Hradec Kralove, 500 03, Czech Republic

    K. Hynková

  3. Department of Medical Biophysics, Faculty of Medicine and Dentistry, Palacky University in Olomouc, Olomouc, 779 00, Czech Republic

    K. Langová

  4. Department of Physics, Faculty of Science, University of Hradec Kralove, Rokitanskeho 62, Hradec Kralove, 500 03, Czech Republic

    J. Loskot

Authors

  1. K. Hynková
  2. I. Voborná
  3. K. Langová
  4. J. Loskot

Corresponding author

Correspondence to K. Hynková.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hynková, K., Voborná, I., Langová, K. et al. Laboratory evaluation of fibre quality and passage hole diameter of interdental toothbrushes. Sci Rep (2026). https://doi.org/10.1038/s41598-026-75283-9

Download citation

  • Received: 03 August 2026

  • Accepted: 06 October 2026

  • Published: 13 October 2026

  • DOI: https://doi.org/10.1038/s41598-026-75283-9

Keywords

来源:Nature 健康护理主题 · nature.com