跳到正文
原文
Medical Xpress·· 2026-10-16AI 评分47

维也纳医科大学发表主动脉根扩大技术,可植入至少大两个型号的人工瓣膜

Aortic root enlargement technique allows surgeons to implant heart valves at least two sizes larger

AI 导读

维也纳医科大学与维也纳大学医院心脏胸主动脉外科在 JTCVS Techniques 发表 Alfred Kocher 技术,通过 T 形切口和专用补片扩大主动脉根,使可植入的人工瓣膜至少大两个型号。

正文
Cardiac surgery team at MedUni Vienna finds a solution to one of the key problems in aortic valve treatment
Credit: MedUni Wien/Houdek

When replacing the aortic valve, a small aortic root can limit the size of the prosthetic valve that can be implanted. If the new valve is too small in relation to the patient's body, the heart must continue to work against increased resistance—a so-called patient-prosthesis mismatch, which is associated with poorer clinical outcomes.

A new surgical technique has now been developed at the Department of Cardiac and Thoracic Aortic Surgery at the Medical University of Vienna and University Hospital Vienna that allows the aortic root to be dilated in a relatively simple and minimally invasive manner. This enables significantly larger prosthetic valves to be implanted, improves blood flow and, at the same time, creates better conditions for future treatment options. The new method and initial clinical findings have been published in the cardiac surgery journal JTCVS Techniques.

The replacement of the diseased aortic valve is regarded as one of the success stories of cardiac surgery. It began in 1960 with the first valve implantations. Over the decades since then, many different mechanical and biological prosthetic valves have been developed and implanted. One problem has remained unchanged since the inception of surgical aortic valve replacement: the annulus required to anchor the prosthetic valve can restrict effective blood flow from the left ventricle into the aorta—particularly in patients with a small aortic root.

Today, this issue is becoming even more significant because the choice of the initial prosthetic valve must take into account not only the current operation but also the patient's entire lifelong treatment strategy. In the spirit of modern "lifetime management," consideration should therefore be given as early as the first procedure to which options remain open for subsequent interventions—such as transcatheter aortic valve implantation (TAVI) within an existing surgical prosthesis. Sizing the first prosthetic valve as generously as possible can create the crucial conditions for this.

A decisive step has now been taken at the Department of Cardiac and Thoracic Aortic Surgery at the Medical University of Vienna and the University Hospital Vienna (AKH): a method has been developed that is comparatively simple from a surgical standpoint, alters the established procedure only slightly, and at the same time takes the natural anatomy of the aortic root into account.

The problem: The suture ring takes up space

The aortic valve is the valve between the left ventricle and the aorta. If it needs to be replaced, the prosthesis is sutured into the so-called aortic annulus using a suture ring. This suture ring requires space—which is why, with established valve prostheses, the opening of the prosthesis is often smaller than the natural opening of the valve. If the aortic annulus is naturally small, only a small prosthesis can be implanted. If the prosthesis is too small in relation to the patient's body, the heart has to pump against increased resistance.

This is referred to as a patient-prosthesis mismatch, which is associated with poorer outcomes. Larger prostheses also offer better prospects should further treatment with a catheter within the existing valve become necessary years later.

The Alfred Kocher technique

Alfred Kocher, head of the Heart Valve Team at the Department of Cardiac and Thoracic Aortic Surgery at the Medical University of Vienna and University Hospital Vienna, first described the "Alfred Kocher technique"—named after him—for enlarging the aortic root in June 2025 and has now published the procedure in the cardiac surgery journal JTCVS Techniques. Since then, the method has been used successfully at MedUni Vienna and is now also being applied at centers across Europe and the U.S.

The operation begins in the same way as a conventional aortic valve replacement. Only after the aortic annulus has been measured is a decision made as to whether enlargement is necessary. To this end, the aortic root is enlarged using a T-shaped incision and reconstructed with a specially shaped patch. The coronary arteries remain unaffected, and the natural shape of the aortic root is largely preserved. This allows prosthetic valves that are at least two sizes larger to be implanted.

"The key advantage of our technique is that we initially proceed as with conventional aortic valve replacement and only need to decide whether an enlargement is necessary after taking the measurements. With a comparatively simple additional surgical step, we can implant significantly larger prosthetic valves without affecting the coronary arteries. It is particularly important that the technique can be performed not only via conventional access but also using minimally invasive and even endoscopic methods," says Kocher.

The Department of Cardiac and Thoracic Aortic Surgery, headed by Daniel Zimpfer, is thus playing a leading international role in the further development of surgical aortic valve replacement. The aim is to overcome existing limitations of the operation while creating less invasive access routes and optimal conditions for the long-term "lifetime management" of patients.

Aortic valve replacement is being completely overhauled

The new technique is part of a wider initiative: within the department, surgical aortic valve replacement is being completely overhauled and standardized. First, the natural dimensions of the aortic annulus are measured using a universally applicable measuring head. The appropriate valve is then selected. If the aortic annulus is too small, the aortic root is dilated using the Alfred Kocher technique. As part of this development, several invention disclosures have been submitted for patent in collaboration with the Department of Technology Transfer at MedUni Vienna.

The standardized procedure is based on a simple principle: Today, a prosthetic valve is designed to last a lifetime, not just for a single operation. "In aortic valve surgery, we must now take into account not only the immediate operation but also our patients' entire subsequent treatment pathway. A sufficiently large prosthetic valve is a key prerequisite for this. The new technique expands our ability to create optimal conditions for long-term care right from the first procedure," says Zimpfer, head of the Department of Cardiac and Thoracic Aortic Surgery.

More information

Alfred A. Kocher et al., A. Kocher technique as default approach to aortic root enlargement, JTCVS Techniques (2026). DOI: 10.1016/j.xjtc.2026.102296

Who's behind this story?

Lisa Lock

Lisa Lock

BA art history, MA material culture. Former museum editor, paramedic, and transplant coordinator. Editing for Science X since 2021. Full profile →

Robert Egan

Robert Egan

Bachelor's in mathematical biology, Master's in creative writing. Well-traveled with unique perspectives on science and language. Full profile →

Citation: Aortic root enlargement technique allows surgeons to implant heart valves at least two sizes larger (2026, October 15) retrieved 15 October 2026 from https://medicalxpress.com/news/2026-10-aortic-root-enlargement-technique-surgeons.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

来源:Medical Xpress · medicalxpress.com