跳到正文
原文
Medical Xpress·· 2026-10-05AI 评分20

Lollylab 棒棒糖式传感器实现唾液对乙酰氨基酚检测

Candy-coated Lollylab checks saliva for medication

AI 导读

研究人员在 ACS Sensors 发表的预印本展示 Lollylab 设备,该装置利用传感器直接分析唾液以对乙酰氨基酚水平。在初步验证中,6 名成人在服用 650 毫克对乙酰氨基酚后使用该设备,在 2 分钟内实现了可靠检测,且参与者反馈其舒适度优于传统拭子。

正文
Candy-coated Lollylab checks saliva for medication
The red, peach-flavored candy coating on Lollylab stimulates saliva production, and a sensor at the bottom analyzes it for acetaminophen. Credit: Adapted from ACS Sensors 2026, DOI: 10.1021/acssensors.6c00691

What if checking medication levels were as simple as enjoying a lollipop? A candy-coated device called Lollylab could provide the answer. In ACS Sensors, researchers describe how the lollipop's stem transfers saliva to a sensor that measures acetaminophen levels.

In an initial test, a peach-flavored prototype reliably detected the pain reliever in six people's saliva in less than two minutes. Participants also found it more comfortable and easier to use than traditional collection swabs.

Saliva offers a window on dosage

Acetaminophen is an ingredient in many over-the-counter products, including pain relievers, cold and flu medications and more. But taking more than the maximum recommended dose can cause serious side effects, such as liver damage.

This is especially concerning for children, who can be at risk of an unintentional overdose at low levels of the medication. Because acetaminophen concentrations in saliva closely reflect those in blood, Sina Khazaee Nejad, Maral Mousavi and colleagues thought saliva could be a simple, noninvasive way to monitor the medication's levels.

A miniature lab inside a lollipop

Mousavi says they were inspired by the saliva sampling system CandyCollect—a lollipop-like device meant to replace throat swabs—but those specimens need to be analyzed elsewhere.

In this work, the researchers wanted to create a miniature laboratory-on-a-lollipop, or Lollylab. "By turning a familiar object like a lollipop into both a saliva collection device and a sensor, Lollylab can collect the sample and perform the measurement directly at the point of care," says Nejad, the first author of the paper.

Lollylab is built from two plastic pieces (each with a round end and a thinner stem) snapped together, with holes at the top for saliva to enter through.

The team coated the top of the device with a red, peach-flavored edible candy shell, which did not interfere with measurements. Saliva flows through the glass fiber paper–lined lollipop stem toward a graphene sensor at the bottom, which measures acetaminophen levels as changes in electrical current. The prototype device detected acetaminophen in both artificial and human saliva.

Candy-coated Lollylab checks saliva for medication
Blue-dyed human saliva enters the Lollylab through holes at the top (left image) and flows through the stick within 60 seconds. Credit: Adapted from ACS Sensors 2026, DOI: 10.1021/acssensors.6c00691

Early results point to broader testing

As proof of concept, six adults used Lollylab before and an hour after taking a standard adult dose of acetaminophen (650 milligrams). The device reliably measured the drug in the participants' saliva in less than two minutes, and they said it was easy to use and more comfortable than typical saliva swabs.

"The main takeaway is that diagnostic testing can be made much easier and more comfortable, especially for children," says Nejad. Next, the researchers plan to validate Lollylab's acetaminophen measurements with more participants, including children, and develop it to detect other substances in saliva such as naturally occurring stress markers.

"Our longer-term goal is to create a multi-assay platform capable of measuring several biomarkers, which could then be evaluated alongside acetaminophen in larger clinical studies."

Publication details

Sina Khazaee Nejad et al, Lollylab: A Lollipop-Inspired Device for Saliva Collection and Detection of Acetaminophen Toxicity in Pediatric Patients, ACS Sensors (2026). DOI: 10.1021/acssensors.6c00691

Journal information: ACS Sensors

Key medical concepts

AcetaminophenSaliva

Who's behind this story?

Sadie Harley

Sadie Harley

BSc Life Sciences & Ecology. Microbiology lab background with pharmaceutical news experience in oil, gas, and renewable industries. Full profile →

Robert Egan

Robert Egan

Bachelor's in mathematical biology, Master's in creative writing. Well-traveled with unique perspectives on science and language. Full profile →

Citation: Candy-coated Lollylab checks saliva for medication (2026, October 5) retrieved 5 October 2026 from https://medicalxpress.com/news/2026-10-candy-coated-lollylab-saliva-medication.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

来源:Medical Xpress · medicalxpress.com